二四六天天好彩精选资料大全

PwC

  • Focus on manufacturing of dust, smoke and oil mist purification equipment
  • One of the best suppliers of comprehensive solutions for the purification of dust, oil and dust in the workshop
support hotline

020-34567-118 Consulting Hotline: 020-34567-118

Product center

  • contact us
  • Sales and technical consulting
  • Manager of Eastern Guangdong
    188-1915-6158
  • Manager of Western Guangdong
    188-1915-2708
  • East China and Northern Region Manager Zhu
    188-1915-3018
  • Central and Western Region Manager Jiang
    188-1915-6918
  • Guangzhou Headquarters
    020-34567-118
  • fax
    020-34567-078
  • mailbox
    info@sf-is.com
  • Factory address
    No.11 Caogang Street, Qiaoshan Village, Shiji Town, Panyu District, Guangzhou
  • Sorry, the picture cannot be displayed normally
DX series automatic discharge type
DX series automatic discharge typeDX series automatic discharge typeDX series automatic discharge type

DX series automatic discharge type
Self-contained star discharge valve is used for discharging while working

Power: 380V / 1.5kw-7.5kw
Maximum flow: 1800-8000m3 / h
Negative pressure: 1800-2400 Pa
Filtration accuracy: 0.3um & 99.9%
Dust vibration mode: automatic pulse back blowing dust removal

Inquire Now DX series automatic discharge type (2098)
share it:
  • product description
  • Technical Parameters
  • Video show
  • service support
DX Series—Automatic Discharge Industrial Dust Collector

大风量脉冲反吹清灰为特点,采用一体化柜式结构,外形美观,专为粉体行业化工行业金属加工行业木工家具行业等大量漂浮粉尘而设计 ,可实现24小时连续工作不停机,性价比高。 DX series products are characterized by automatic unloading , large air volume , and pulse back blowing ash cleaning . They adopt an integrated cabinet structure and beautiful appearance. They are specially designed for powder industry , chemical industry , metal processing industry , woodworking furniture industry, etc. Designed to achieve 24 hours of continuous work without downtime and high cost performance. Equipped with Siemens motor and Japanese Toray polyester fiber filter cartridge to ensure high-level filtration accuracy and efficiency.

♦ Siemens motor, continuous escort

方面三相380V电压采用西门子三相异步电机,配置特殊定制铝合金叶轮,设计负压和流量完美结合,运行稳定、故障率低、噪音小,可24小时连续工作。 In terms of power system , the three-phase 380V voltage adopts Siemens three-phase asynchronous motors, equipped with special custom aluminum alloy impellers, the perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and can work continuously for 24 hours.





滤筒过滤器,高过滤精度 Cartridge filter, high filtration accuracy

方面选用滤筒式过滤器,日本东丽聚酯纤维基材。 For the filtration system , a cartridge filter is used, and the Japanese Toray polyester fiber substrate is used. Standard configuration of polyester fiber oil-proof and water-proof material, the filter accuracy of dust with an equivalent diameter of 3 micrometers or more is more than 99%, and a filter cartridge material with higher filtering accuracy can be selected.




♦ Specially set dust cleaning door, no secondary pollution

The pneumatic pulse blowback system consists of a cylinder, an electromagnetic pulse valve, a PLC controller, and compressed air. One end of the pulse valve is connected to a compressed air storage cylinder and the other end is connected to an injection pipe. An exhaust valve is installed on the valve cover, and the exhaust valve is controlled by a pulse controller.
When there is no signal from the pulse controller, the pulse solenoid valve starts to work, and each time the ash cleaning is completed at about 0.1 to 0.3S, it is the high-pressure air that is sprayed at this instant to play a good ash cleaning effect. Air enters the filter cartridge at a high flow rate, causing the filter cartridge to expand rapidly, causing an impact vibration, causing the dust attached to the filter cartridge to be shaken off, and the fine dust adsorbed on the surface of the filter material is shaken into the dust collecting bucket under the action of the airflow .





♦ Electric control system, quality assurance

方面,主要电控元件采用国际著名品牌——法国施耐德产品。 In terms of electrical systems , the main electronic control components are from internationally renowned brands-French Schneider products. The motor realizes independent control of the electrical box, built-in power sequence switch, thermal overload protection, phase loss, reverse phase and other phase sequence protection. The control panel is simple and generous, which can easily realize remote control, linkage control and other functions.





自动卸料电机,24小时连续工作,不停机作业 Automatic unloading motor, continuous working for 24 hours without stopping operation

主机配置了星型卸料阀,对于粉尘量特别大,集尘器需要连续运行的场合特别适用,其工作平稳可靠,卸料均匀,密封性好。 The automatic unloading host is equipped with a star-shaped unloading valve, which is especially suitable for the occasions where the dust volume is particularly large and the dust collector needs to run continuously.







♦ Industrial non-slip casters, top polyurethane material

是本机标配配件。 Industrial mobile casters are standard accessories for this machine. The wheels are made of top-grade polyurethane (PU), and the bracket uses 2.5mm pickling plates to increase the reinforcement. Each 4 inch caster can carry 150kg. The tread design of the wheel surface enhances the anti-skid performance.








♦ Customized suction port, according to your needs