♦ Siemens motor, continuous escort
方面三相380V电压采用西门子三相异步电机，配置特殊定制铝合金叶轮，设计负压和流量完美结合，运行稳定、故障率低、噪音小，可24小时连续工作。 In terms of power system , the three-phase 380V voltage adopts Siemens three-phase asynchronous motors, equipped with special custom aluminum alloy impellers, the perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and can work continuously for 24 hours.
滤筒过滤器，高过滤精度 ♦ Cartridge filter, high filtration accuracy
方面选用滤筒式过滤器，日本东丽聚酯纤维基材。 For the filtration system , a cartridge filter is used, and the Japanese Toray polyester fiber substrate is used. Standard configuration of polyester fiber oil-proof and water-proof material, the filter accuracy of dust with an equivalent diameter of 3 micrometers or more is more than 99%, and a filter cartridge material with higher filtering accuracy can be selected.
♦ Specially set dust cleaning door, no secondary pollution
The pneumatic pulse blowback system consists of a cylinder, an electromagnetic pulse valve, a PLC controller, and compressed air. One end of the pulse valve is connected to a compressed air storage cylinder and the other end is connected to an injection pipe. An exhaust valve is installed on the valve cover, and the exhaust valve is controlled by a pulse controller.
When there is no signal from the pulse controller, the pulse solenoid valve starts to work, and each time the ash cleaning is completed at about 0.1 to 0.3S, it is the high-pressure air that is sprayed at this instant to play a good ash cleaning effect. Air enters the filter cartridge at a high flow rate, causing the filter cartridge to expand rapidly, causing an impact vibration, causing the dust attached to the filter cartridge to be shaken off, and the fine dust adsorbed on the surface of the filter material is shaken into the dust collecting bucket under the action of the airflow .
♦ Electric control system, quality assurance
方面，主要电控元件采用国际著名品牌——法国施耐德产品。 In terms of electrical systems , the main electronic control components are from internationally renowned brands-French Schneider products. The motor realizes independent control of the electrical box, built-in power sequence switch, thermal overload protection, phase loss, reverse phase and other phase sequence protection. The control panel is simple and generous, which can easily realize remote control, linkage control and other functions.
♦ Drawer type dust box, practical and convenient
采用抽屉式结构，当灰尘积满后打开门板，即可将集尘箱拉出进行灰尘的清理，完成后再将集尘箱送入即可。 The dust collecting box adopts a drawer structure. After the dust is full, open the door panel, and the dust collecting box can be pulled out to clean up the dust. After the dust collecting box is completed, the dust collecting box can be sent in. Convenient, fast and practical.
♦ Industrial non-slip casters, top polyurethane material
是本机标配配件。 Industrial mobile casters are standard accessories for this machine. The wheels are made of top-grade polyurethane (PU), and the bracket uses 2.5mm pickling plates to increase the reinforcement. Each 4 inch caster can carry 150kg. The tread design of the wheel surface enhances the anti-skid performance.
♦ Customized suction port, according to your needs