PGO series—large-capacity solid-liquid separation type industrial oil suction machine
作业。 PGO solid-liquid separation series large-capacity industrial oil-absorbing / water-absorbing machine , featuring large-capacity , solid-liquid separation , and turbo-motor overhead , compact structure, suitable for occasions with limited space, designed for water accumulation , oil accumulation , cooling Liquid and emulsion recovery and reuse design, especially suitable for solid-liquid separation and liquid reuse operations. Widely used in machine tool cutting fluid recovery, food liquid processing places.
♦ High-voltage power and continuous escort
方面采用国际先进的精铸涡轮风机（气泵），宽压双频，高可靠、低噪音、长寿命、可24小时持续工作。 In terms of power system , it adopts international advanced precision casting turbine fan (air pump), wide pressure dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power can be selected from 1.5kw-4.0kw, and the power supply can be single-phase 230V 50 / 60Hz, three-phase 220-240 / 345-415V 50Hz and 220-275 / 380-480V 60Hz, etc., special voltages can be customized.
♦ Electrical protection and famous brand components
方面，主要电控元件采用国际著名品牌——法国施耐德产品。 In terms of electrical systems , the main electronic control components are from internationally renowned brands-French Schneider products. The turbine motor realizes independent control of the electric box, built-in thermal overload protection, optional phase sequence protection such as phase loss, reverse phase, etc. The control panel is simple and generous, which can easily realize remote control, linkage control and other functions.
♦ Efficient filtering and rejection of dust penetration
方面选滤筒式过滤器，滤筒式过滤器采用日本进口东丽“TORAY”防油防水滤料，特定工况可特殊定制。 For the filtration system , a cartridge filter is selected. The cartridge filter uses Toray "TORAY" oil-proof and water-proof filter material imported from Japan. Specific working conditions can be customized.
固液分离、按需定制 ♦ Solid-liquid separation, customized as required
方面选用不锈钢筛网，标准配置1.0～2.0mm不锈钢网孔组成，可以根据客户的要求精度进行特殊定制。 For solid-liquid separation , stainless steel screen is used. The standard configuration is 1.0 ~ 2.0mm stainless steel mesh. It can be customized according to customer's requirements.
The solid collector traps and traps the iron filings, and the liquid flows into the liquid collection barrel below, which can be discharged by an oil pump.
♦ Oil drainage system, efficient and reliable
，动力十足，有效排油，进油液回收处理。 For the oil drainage system , a stainless steel oil drainage pump is selected, which is full of power, effectively drains oil, and recovers the oil.
浮球显示，提醒排液 ♦ Float display, remind to drain liquid
采用彩色浮球显示。 The liquid level display adopts color floating ball display.
A section of transparent oil-resistant pipe is set under the collection barrel, and the colored liquid inside the collection barrel is used to instantly display the liquid level inside the collection barrel to remind the operator to drain oil immediately.
♦ Negative pressure detection, dust removal reminder
是整机标准配置元件，是普华公司专门为工业吸尘器定制，绿、蓝、红分别对应各功率段机器内部负压情况，指针指向红色区域代表过滤器需要进行清灰或者更换。 The negative pressure gauge is a standard configuration component of the whole machine. It is customized by Puhua for industrial vacuum cleaners. Green, blue, and red correspond to the internal negative pressure of the machine in each power segment. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.
♦ Industrial casters, standard configuration
安装简单方便。 Installation of industrial casters is simple and convenient. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickling plate to increase the reinforcement. Each 2 inch caster can carry 50kg. The tread design of the wheel surface enhances the anti-skid performance.